Sewage Submersible Pump (ULS Series)
Submerged Pump
Sewage Submersible Pump (ULS Series)
Sewage Submersible Pump (ULS Series)
“U-Neel” High Speed Light Duty Sewage and Effluent Submersible Pump is vertical single casing pump with non clog, channel type impeller for handling of screened sewage. Squirrel cage induction motors specially manufactured by “U-Neel” with Class ‘F’ and Class ‘H’ insulation suitable upto 155°C and 180°C for 15 Starts and Stops per hour. “ULS” Pumps are also available with auto coupling arrangement.
| No. | DESCRIPTION | M.O.C. |
|---|---|---|
| 1 | Pump Casing | C.I.FG260 |
| 2 | Impeller | C.I.FG260 |
| 3 | Wear Plate | C.I.FG260 |
| 4 | Top Cover | C.I.FG260 |
| 5 | Stand | C.I.FG260 |
| 6 | Terminal Box | C.I.FG260 |
| 7 | Shaft | S.S. 410 |
| 8 | Mech. Seal (Upper) | C vs SiC |
| 9 | Mech. Seal (Lower) | SiC / SiC |
| No. | DESCRIPTION | M.O.C. |
|---|---|---|
| 10 | Ball Bearing (DE) | SKF or Eq. |
| 11 | Ball Bearing (NDE) | SKF or Eq. |
| 12 | Stator Stamping | Si. Stamping |
| 13 | Rotor Die Cast | Aluminium |
| 14 | Motor Body | S.S./C.I.F0260 |
| 15 | Cable | PVC Inรน. |
| 16 | Cable Grommet | Ni. Rubber |
| 17 | Cable Gland | C.I.FG 260 |
| Head | upto 75 Mtr |
|---|---|
| Capacity | upto 200 M3/Hr |
| Motor | Two Pole Continuous Duty, Squirrel Cage, Submersible type induction motor. |
| Speed (Syn.) | 3000 RPM |
| Connection | DOL (Star Delta optional) |
| Range | 0.75 HP to 30.0 HP |
| Temperature | 45° C (Also available for higher temperature on request) |
| Voltage | 415V, 30. 50 Hz. 230V, 10, 50 Hz. (upto 3.0 HP) 110V, 30, 60 Hz. 110V, 10, 60 Hz |
| Class of Insulation | ‘F’ Class (optional ‘H’ Class available on request) |
| Protection | IP 68 |
| Concentration | upto 15% |
| Free Passage | upto 50mm |
- Removes all sorts of Industrial Waste Water.
- Suitable for Handling Screened Sewage.
- Cleaning of Manholes / Trenches.
- Removal of Kitchen Waste.
MATERIAL OF CONSTRUCTION ON REQUEST
Motor Body : AISI 304, AISI 316, CF8, CF8M
Pump Casing : CF8, CF8M, CF3M
Impeller : CA15, CA40, CF8, CF8M, CF3M
Wear Plate : CA15, CA40, CF8, CF8M, CF3M
Shaft : AISI 420, AISI 431, AISI 304, AISI 316, AISI 316L
Mechanical Seal : SiC / SiC, TC / TC, C / SiC, C/ Cr Steel, C/Ce
Strainer : AISI 304, AISI 316
Cable : HO7RNF, FRLS
Also Available with on Request
Auto Coupling Installation, Cooling Jacket, Auto Level Controller (Float Switch), Thermal Protection, [eal Monitoring Arrangement, MCB Starter (for 10), Cutter / Agitator / Grinder Arrangement
- Light in Weight.
- Portable for Easy Handling.
- Bottom Suction & Side Delivery.
- Can be used for Permanent Installation.
- All kind of Discharge Connections Available.
- Can Move Solids upto 50mm.
- Easy Maintenance.