Sewage Submersible Pump (USE Series)
Submerged Pump
Sewage Submersible Pump (USE Series)
Sewage Submersible Pump (USE Series)
“U-Neel” High Speed Light Duty Sewage and Effluent Submersible Pump is vertical single casing pump with non clog, channel type impeller for handling of screened sewage. Squirrel cage induction motors specially manufactured by “U-Neel” with Class ‘F’ and Class ‘H’ insulation suitable upto 155°C and 180°C for 15 Starts and Stops per hour. “ULS” Pumps are also available with auto coupling arrangement.
| No. | DESCRIPTION | M.O.C. |
|---|---|---|
| 1 | Pump Casing | C.I.FG260 |
| 2 | Impeller | C.I.FG260 |
| 3 | Wear Plate | C.I.FG260 |
| 4 | Top Cover | C.I.FG260 |
| 5 | Stand | C.I.FG260 |
| 6 | Terminal Box | C.I.FG260 |
| 7 | Shaft | S.S. 410 |
| 8 | Mech. Seal (Upper) | C vs SiC |
| 9 | Mech. Seal (Lower) | SiC / SiC |
| No. | DESCRIPTION | M.O.C. |
|---|---|---|
| 10 | Ball Bearing (DE) | SKF or Eq. |
| 11 | Ball Bearing (NDE) | SKF or Eq. |
| 12 | Stator Stamping | Si. Stamping |
| 13 | Rotor Die Cast | Aluminium |
| 14 | Motor Body | S.S. |
| 15 | Cable | PVC Inรน. |
| 16 | Cable Grommet | Ni. Rubber |
| 17 | Cable Gland | C.I.FG 260 |
| Head | upto 25 Mtr |
|---|---|
| Capacity | upto 180 M3/Hr |
| Motor | Four Pole Continuous Duty, Squirrel Cage Submersible type Induction Motor.Speed (Syn.) |
| Speed (Syn.) | 1500 RPM |
| Connection | DOL (Star Delta optional) |
| Range | 3.0 HP to 10.0 HP |
| Temperature | 45° C (Also available for higher temperature on request) |
| Voltage | 415V. 30, 50 H2 110V. 30, 60 Hz |
| Class of Insulation | ‘F’ Class (optional ‘H’ Class available on request) |
| Protection | IP 68 |
| Concentration | upto 40% |
| Free Passage | upto 40mm |
- Removal of Unscreened Sewage.
- Transfer of Suspended Solids.
- Pumping of Waste / Storm Water.
- Handling of Treated Effluent with Slurries and Solids.
MATERIAL OF CONSTRUCTION ON REQUEST
Motor Body : CI, AISI304, AISI316, CF8, CF8M
Pump Casing : CF8, CF8M, CF3M
Impeller : CF8, CF8M, CF3M
Wear Plate : CF8, CF8M, CF3M
Shaft : AISI 420, AISI 431, AISI 304, AISI 316, AISI 316L
Mechanical Seal : SiC / SiC, TC / TC, C / SiC, C/ Cr Steel, C/Ce
Cable : HO7RNF, FRLS
Also Available with on Request
Auto Coupling Installation, Auto Level Controller (Float Switch), Cutter / Agitator /
Grinder arrangement, Thermal Protection, Seal Monitoring Arrangement.
- Light in weight.
- Portable for Easy Handling.
- Can be used for Permanent installation.
- Minimized Vibration & Noise Level.
- Bottom Suction & Side Delivery.
- Easy Maintenance.
- All kine of Discharge Connections Available.